NAKAMURA-TOME JX-250

世界最小工具主轴「NT Smart Cube」
高刚性ATC型符合加工机

• 配备世界最小ATC工具主轴「NT Smart Cube」
• 主轴端距1,850mm！
• 紧凑的工具主轴，既能减少轴向干涉,也能获得更广的加工空间.
• 主轴中心为中心X-Y平面有效行程□250mm
• 工具轴旋回角度240° (±120°)
• ATC刀库可配备40把刀具(op. 80,120)
• 对向双主轴，左右同时加工，缩短加工时间
• 宽大,低重心设计的高刚性水平床身，采用垂直动柱构造

双刀塔标配Y轴
交叉行程可以应对各种各样的加工

• 交叉行程※(R:490mm, L:140mm)
※一个方向的刀塔后退时、另一方的刀塔可以超越原点前进铣削马达功率5.5/3.7kW, 转数6,000min-1世界最小工具主軸「NT Smart Cube」
高剛性ATC型符合加工機

• 配備世界最小ATC工具主軸「NT Smart Cube」
• 主軸端距1,850mm！
• 緊湊的工具主軸，既能減少軸向干涉,也能獲得更廣的加工空間.
• 主軸中心為中心X-Y平面有效行程□250mm
• 工具軸旋回角度240° (±120°)
• ATC刀庫可配備40把刀具(op. 80,120)
• 對向雙主軸，左右同時加工，縮短加工時間
• 寬大,低重心設計的高剛性水準床身，採用垂直動柱構造

雙刀塔標配Y軸
交叉行程可以應對各種各樣的加工

• 交叉行程※(R:490mm, L:140mm)
※一個方向的刀塔後退時、另一方的刀塔可以超越原點前進銑削馬達功率5.5/3.7kW, 轉數6,000min-1The World’s Shortest Tool-Spindle “NT Smart Cube”
High Rigidity Multitasking Machine with ATC

• Equipped The World’s Shortest Tool-Spindle “NT Smart Cube”
• Distance between spindles 1,850mm.
• Thanks to the ultra-compact size of the Tool Spindle, interference is reduced, and a wider machining area is ensured.
• 250 mm square stroke in the X-Y plane.
• B-axis swiveling range 240° (±120°).
• Number of tools for ATC magazine 40pcs (op,80 ,120).
• Faster cycle times thanks to simultaneous machining with upper and lower tools on L/R opposed twin-spindles.
• The slides, having a vertical column structure, are mounted on a high rigidity horizontal machine bed with low gravity design.

Y-Axis is Standard for Both Turrets. (Second Turret is Op.)
L/R Z-Axis Cross-over Travel for Wider Working Range

• Cross-over travel ※(R:490mm, L:140mm).
• When one turret is retracted in the Z-axis direction, the other turret can advance beyond its Z-Axis reference point.
• Milling motors have 5.5/3.7kW power and 6,000 min-1 max. speed.